Environment Canada and Climate Change (ECCC), which is the Canadian equivalent of the U.S. Environmental Protection Agency, recently released draft regulations to control the cross-border movement of hazardous waste and hazardous recyclable material. The regulations, if eventually promulgated, would repeal and replace the Export and Import Regulations, the Interprovincial Movement Regulations, and the PCB Waste Export Regulations. Although the proposed Regulations would maintain the core permitting and movement tracking requirements of the former regulations, the regulatory provisions would be amended to ensure greater clarity and consistency of the regulatory requirements.
Electronic Tracking System
The proposed Regulations would provide flexibility for the electronic movement tracking system by no longer prescribing the specific form required for tracking shipments of hazardous waste and hazardous recyclable material. Instead, the proposed Regulations would require specific information to be included in a movement document (that can be generated electronically) and would allow movement document information to be passed on to different parties in parallel to facilitate the tracking rather than prescribing the handover of copies from one party to another.
Furthermore, given that movement documents would be able to be managed electronically, the proposed Regulations would no longer require that the movement document and permit physically accompany the shipment. The proposed Regulations would instead require parties to immediately produce the movement document and the permit upon request. Similar simplifications would be included in the provisions related to the movement document for interprovincial movements of hazardous waste and hazardous recyclable material.
The proposed Regulations would clarify the responsibility of a receiving (importing) facility to pass on information regarding the origin of the hazardous waste and hazardous recyclable material being transferred to a subsequent authorized facility for final disposal or recycling. As the safety of everyone is important and so is protecting the environment, it would make sense to find a contact for consultation if you need help with your company’s regulatory needs.
Clarifications would also be made to the provisions for the return and rerouting of shipments to better align those requirements with current practice and ensure that confirmation of disposal from the alternative facility is also required in order to properly complete the tracking of those shipments.
Definitions of hazardous waste and hazardous recyclable material
With respect to interprovincial movements, under the proposed regulations, the definitions of hazardous waste and hazardous recyclable material would be aligned with those of international movements. In addition, proposed changes to those definitions would ensure a more consistent application of regulatory provisions for all types of transboundary movements and would better align definitions with other jurisdictions and international agreements. Some of these proposed changes are listed below.
Toxicity characteristic leaching procedure
The proposed Regulations would reference the toxicity characteristic leaching procedure (TCLP), in its entirety. This procedure is a standard test method used to evaluate the mobility of a number of contaminants that may be found in waste and recyclable material and, therefore, their potential for release. While making reference to the TCLP, the Export and Import Regulations exclude a step requiring that the size of particles in a sample be reduced to fit into the testing apparatus. In order to ensure that the method is used consistently, hazardous waste and hazardous recyclable material undergoing testing would need to be shredded to meet the TCLP’s specific particle size requirement.
Electrical and electronic equipment
Electrical and electronic equipment (EEE) is not currently listed as hazardous under the Export and Import Regulations and must meet other criteria to fall under the definitions of hazardous waste or hazardous recyclable material, which can be difficult to ascertain. The proposed Regulations would clearly designate “circuit boards and display devices and any equipment that contains them” as hazardous waste or hazardous recyclable material to be controlled when destined for specific disposal or recycling operations. The proposed Regulations would maintain the exclusion currently under the Export and Import Regulations for this type of hazardous waste and hazardous recyclable material moving within OECD countries (including moving between provinces and territories in Canada).
The proposed Regulations would remove the small quantity exclusion for hazardous waste and hazardous recyclable material containing mercury. Any waste or material containing any amount of mercury that meets the definitions of hazardous waste or hazardous recyclable material would be subject to the regulatory provisions for both international and interprovincial movements.
Batteries are not currently listed as hazardous under the Export and Import Regulations and must meet other criteria to fall under the definitions of hazardous waste or hazardous recyclable material. Some types of batteries are clearly covered by the definitions; however, for some other types it is not clear. The proposed Regulations would clarify that all types of batteries (i.e. rechargeable and non-rechargeable) being shipped internationally or interprovincially for disposal or recycling are included in the definitions of hazardous waste and hazardous recyclable material.
Waste and recyclable material generated on ships
The proposed Regulations would add a new exclusion to clarify that waste or recyclable material generated from the normal operations of a ship is not captured by the definitions of hazardous waste and hazardous recyclable material. This exclusion would further harmonize the proposed Regulations with the Basel Convention (which excludes this waste) and the Canada Shipping Act, 2001 where this waste is already covered.
The proposed Regulations would add a new exclusion for waste or recyclable material that is to be transported in a container after the contents of that container have been removed to the maximum extent feasible and before the container is either refilled or cleaned of its residual content. This exclusion would clarify that such waste or recyclable material is not captured by the definitions of hazardous waste and hazardous recyclable material.
Recycling operation R14
Over the years, ECCC has received numerous questions regarding recycling operation R14 found in Schedule 2 of the Export and Import of Hazardous Waste and Hazardous Recyclable Material Regulations. Section 2 R14 reads as follows : “Recovery or regeneration of a substance or use or re-use of a recyclable material, other than by any of operations R1 to R10”. This recycling operation is not included in the Basel Convention or the OECD Decision. ECCC is proposing to delete this part of operation R14 to remove uncertainty about its application. This change may result in some recyclable material no longer being captured and defined as hazardous. For example, a used material that is to be used directly in another process that is not listed as a recycling operation would no longer be captured.
This change would further align regulatory provisions with international guidelines under the Basel Convention.
Proposed changes regarding waste containing PCBs
The regulatory provisions for the export of waste containing PCBs would be streamlined and integrated into those for hazardous waste and hazardous recyclable material. This would include removing the partial prohibition on exports of waste containing PCBs in a concentration equal to or greater than 50 mg/kg to allow controlled exports beyond the United States. Therefore, waste and recyclable material containing PCBs in a concentration equal to or greater than 50 mg/kg would be able to be exported provided a permit is obtained and all of the conditions of the proposed Regulations are met.
Proposed changes to improve the permitting process
The proposed Regulations would no longer require the name of the insurance company and the policy number for the exporter, the importer and carriers with the notification (i.e. permit application). In addition, copies of the contracts would no longer need to be provided with the notification. In both cases, the applicant would be required to provide a statement to the effect that valid insurance policies and contracts are in place and to keep proof of insurance coverage and copies of contracts at their place of business in Canada for five years.
The proposed Regulations would require a new notification for any changes in information, other than correcting clerical errors, on a permit.
The proposed Regulations would increase the maximum duration of a permit from 12 months to 3 years, consistent with international agreements, for the movement of hazardous recyclable material directed to pre-consented facilities within OECD countries.
The proposed Regulations would set out conditions under which a permit may be refused, suspended or revoked.
Impacts on Business – Costs and Operations
According to the consultation documents prepared by ECCC, the proposed Regulations, if promulgated, would affect 295 companies, 281 of which would be considered small businesses. For these small businesses, the proposed Regulations are expected to result in incremental compliance and administrative costs of $296,000 in average annualized costs, that is, $1,070 per small business.
If the proposed Regulations are implemented, it would result in an clarifications to the definitions of hazardous waste and would ensure a more consistent application of regulatory provisions. In addition, the proposed Regulations would help minimize environmental impacts outside Canada by ensuring that exported hazardous waste and hazardous recyclable material reach the intended disposal or recycling facilities. For any company that performs hazardous operations, the idea to try and find flexible safety doors is one that could benefit industries such as transportation and the medical field, as this helps increase safety in this process and acts as a security barrier between any hazards. The present value of compliance and administrative costs of the proposed Regulations would be $2.5 million in 2017 Canadian dollars, discounted at 3% to 2018 over a 10-year period between 2021 and 2030.
The proposed Regulations would impose incremental administrative costs on industry attributable to the completion of additional movement documents for interprovincial movements of hazardous waste and hazardous recyclable material. Provincial and territorial authorities that are using a tracking system would achieve small savings if they decided not to request movement document information. The present value of administrative costs of the proposed Regulations are expected to be $460,000 in 2017 Canadian dollars, discounted at 3% to 2018, over a 10-year period between 2021 and 2030.
Public comments to the proposed Regulations are being accepted by ECCC until up to mid-February. Any person may file with the Minister of the Environment comments with respect to the proposed Regulations or a notice of objection requesting that a board of review be established under section 333 of the Canadian Environmental Protection Act, 1999 and stating the reasons for the objection. All comments and notices must cite the Canada Gazette, Part I, and the date of publication of this notice, and be sent by mail to Nathalie Perron, Director, Waste Reduction and Management Division, Environmental Protection Branch, Department of the Environment, 351 Saint-Joseph Blvd., Gatineau, Quebec K1A 0H3 (fax: 819-938-4553; email: email@example.com).